![OLYMPUS DIGITAL CAMERA](http://itsbetterhandmade.com/wp-content/uploads/2015/04/P4100006-300x225.jpg)
The wood plate was reclaimed and recycled from a felled elm tree aboard Marine Corps Base Quantico, Va. The face was sanded to 400 grit for a silky smooth feel. I drew the Celtic knot in by hand with pencil and then burned the design in with a wood burning tool. Notice how the “under”
strokes darken to enhance the impression of the knot weaving around itself.
![OLYMPUS DIGITAL CAMERA](http://itsbetterhandmade.com/wp-content/uploads/2015/04/P4100008-300x225.jpg)
I drilled two 8mm holes into the face to accommodate ribbon or string to tie your wedding rings in place. I added a slight trough between the holes on the back if you want to use thick or multiple ribbons. I also added a keyhole hanger in the back, so you can put this piece on your wall as a remembrance of your special day.
![OLYMPUS DIGITAL CAMERA](http://itsbetterhandmade.com/wp-content/uploads/2015/04/P4100011-300x225.jpg)
Diameter at widest point: 4 1/2 inches (11.4 cm)![OLYMPUS DIGITAL CAMERA](http://itsbetterhandmade.com/wp-content/uploads/2015/04/P4100010-300x225.jpg)
![OLYMPUS DIGITAL CAMERA](http://itsbetterhandmade.com/wp-content/uploads/2015/04/P4100010-300x225.jpg)
Thickness: 3/4 inch (1.9 cm)
Like us on Facebook! www.facebook.com/HopeAndGracePens
– Available at my Articents Store!